What size tyre do I require? And where do I look for it? - Bigwheels

Mon to Fri: 8am - 5pm, Sat: 8am - 12pm

Address

618 Great Western Highway Girraween NSW 2145

Mail us on

[email protected]

It can be difficult to figure out what size tyre you need. The codes on the sidewall of your tyre may appear to be a random collection of numbers. This is until you need to replace a tyre, but the tyres shop in Blacktown provides essential information about the tyre size your car requires. Each tyre code is displayed in the format 205/55R16 and is used to identify the size, manufacturer, and physical properties of the tyre. Here we will look at the numbers on your tyre that you should pay attention to and what each one means when it is time to replace your tyres.

How to read the tyre code

A series of digits and letters make up your tyre code. Because there are so many various tyre codes, it is crucial to know your current tyre size so you know what size to order when replacing. Let us break down what each element of the 205/55R16 code implies because it is the most prevalent tyre size in the state.

Where to look for the tyre size

The recommended tyre size will be specified in your vehicle’s owner manual by the manufacturer. This booklet should contain all of the information you need to make an informed tyre purchase. The tyre placard, which is commonly situated inside the driver’s door jamb, also has information about tyre size. The size of the tyre, as well as the recommended tyre pressures, is frequently listed on the tyre placard.

Tyres, on the other hand, have a coding system molded into its sidewall. This enables you to comprehend their technological capabilities, allowing you to drive appropriately based on the type of tyre you are now using. It will also assist you in determining which tyre you need to replace it with when the time comes. When buying a new pair of tyres in Blacktown, make sure the size is right for your vehicle and that the load and weight ratings are up to code.

 

Method of tyre size measurement
The wheel size measurement is the most prevalent method of tyre size measurement. The total tyre code also includes two other key metrics, both of which include ratings.

The 1st letter
The majority of tyre codes start with a letter or letters that identify the vehicle and the service it is intended for. The following are the common letters:

  • P
    Cars, minivans, sport utility vehicles, and light-duty pickup trucks (usually 1/4- and 1/2-ton load capacity) are all considered passenger vehicles.
  • T
    T stands for a temporary spare, often known as a space saver, which is only intended to be used temporarily while the original tyre is repaired or replaced.
  • LT
    The LT designation denotes that the tyre is intended for use on vehicles capable of hauling big freight or towing large trailers. This comprises medium and heavy-duty pickup trucks, sport utility vehicles, and full-size vans (usually with a 3/4- and 1-ton load capacity).

Tyre width
The 205 in this code refers to the tyre’s width, with the three numbers indicating the width in millimeters. From sidewall to sidewall, a tyre labeled with 205 at the start will measure 205mm across the tread.

Aspect ratio
The aspect ratio, or profile height of the tyre sidewall stated as a percentage of the tyre width, is the following two digits on your tyre code. The 55 in the 205/55R16 code indicates that the tyre’s aspect ratio is 55 percent of its width.

Radial
Radial tyres account for nearly all new tyres in Blacktown. This means that cord piles are positioned at a 90-degree angle to the direction of travel to offer the tyre added strength. Your radial tyre will be identified by the letter R in the tyre code.

Wheel diameter
The next two numbers on your tyre code are the diameter of the tyre from bead to bead, as well as the size of the wheel rim that the tyre is connected to. The 16 indicates that the tyre will fit on a 16-inch wheel rim in this designation 205/55R16.

Tyre construction
The letter R denotes radial-ply structure, which refers to the manner the tyre is made. Because most car tyres are made this way, you will rarely come across one that does not have an R.

Load index
The tyre’s maximum load capacity is indicated by code 91. For car tyre load index ratings, see the load index table.

Speed symbol
V is a speed code that specifies how fast a tyre may be driven safely if it is in good condition, properly fitted, and has the necessary inflation pressure. For car tyre speed sign ratings, see the speed symbol table.

Speed rating on tyre
The speed rating is shown as a letter and denotes the maximum speed at which a tyre can safely carry a load. The speed ratings run from A (the slowest) to Y (the fastest), except for H, which is classed somewhere between U and V. Each speed rating letter correlates to a value in kilometers per hour, just like the load index.

Wrapping it up
Installing the appropriate tyres on your car is critical to its overall performance and safety. The tyres shop in Blacktown provides tyres based on the conditions you will be driving in as well as your preferences for vehicle response and handling. Thus, to be able to make the best choice when it comes to buying tyres, you need to know what tyre size is appropriate for your car.

Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.

Add Your Comments

Your email address will not be published. Required fields are marked *

Get a Grip Sale

Free Pickup and Drop off for Home or Business

COVID-19 Update: Business As Usual! Our Team Are Taking All Preventative Measures At This Time.